(466 video/articles)
  • Grid View List View
Berger Bullets Varmint Bullets
Berger Bullets Varmint Bullets

Sinclair President Bill Gravatt talks with Walt Berger and Eric Stecker of Berger Bullets about their line of varmint bullets.

Berger Bullets Interview part 2 of 4
Berger Bullets Interview part 2 of 4

This video is the continuation of the Berger bullets interview by Sinclair President Bill Gravatt with Walt Berger and Eric Stecker of Berger Bullets. In this segment they discuss what makes the world renowned Berger Bullets so good.

Berger Bullets Interview part 3 of 4
Berger Bullets Interview part 3 of 4

This video is the continuation of the Berger bullets interview by Sinclair President Bill Gravatt with Walt Berger and Eric Stecker of Berger Bullets. In this segment they discuss what Berger is doing today and what is to come.

Berger Bullets Interview part 4 of 4
Berger Bullets Interview part 4 of 4

This video is the continuation of the Berger bullets interview by Sinclair President Bill Gravatt with Walt Berger and Eric Stecker of Berger Bullets. In this segment they discuss Bergers hunting bullets.

Hornady 6.5 Cereedmoor Superformance
Hornady 6.5 Cereedmoor Superformance

Learn about the Hornady 6.5 Cereedmoor Superformance by watching this video

Hornady 9.3 Dangerous Game
Hornady 9.3 Dangerous Game

Learn about the Hornady 9.3 Dangerous Game by watching this video

Hornady 45 Colt
Hornady 45 Colt

Learn about the Hornady 45 Colt by watching this video

Hornady 50 BMG
Hornady 50 BMG

Learn about the Hornady 50 BMG by watching this video

Hornady 338 Marlin
Hornady 338 Marlin

Learn about the Hornady 338 Marlin by watching this video

Hornady 416 Ruger
Hornady 416 Ruger

Learn about the Hornady 416 Ruger by watching this video

Hornady Classic Kit
Hornady Classic Kit

Learn about the Hornady Classic Kit by watching this video

Hornady Critical Defense 12 Gauge
Hornady Critical Defense 12 Gauge

Learn about the Hornady Critical Defense 12 Gauge by watching this video

  • Grid View List View
Sinclair Decapping Die Instructions
Sinclair Decapping Die Instructions

As received, the Sinclair Decapping Die will accommodate cartridges 22 caliber and up in any length up to 338 Lapua Magnum.

Sinclair Micrometer for Wilson Trimmers Instructions
Sinclair Micrometer for Wilson Trimmers Instructions

The Sinclair Micrometer is designed for use on L.E. Wilson Case Trimmers in place of the stop screw that comes with each Wilson trimmer. The Sinclair Micrometer allows you to quickly and accurately make changes to trim length.

Shark Fin Clamp Assembly Instructions
Shark Fin Clamp Assembly Instructions

To install your Wilson trimmer on the Sinclair bracket, the two slotted screws in the bottom of the trimmer must be replaced with the enclosed allen head screws.

Sinclair Case Trimmer Bracket Instructions
Sinclair Case Trimmer Bracket Instructions

To install your Wilson trimmer on the Sinclair bracket the two slotted screws at the bottom of the trimmer must be replaced with the enclosed allen screws. For ease of installation remove only one screw at a time.

Sinclair Meplat Trimmer Instructions
Sinclair Meplat Trimmer Instructions

When trimming meplats, you are typically looking to take off approximately .005” of length. This amount will uniform most of your bullets. We recommend sorting your bullets by overall length prior to trimming.

Sinclair Stainless Ultimate Trimmer Instructions
Sinclair Stainless Ultimate Trimmer Instructions

The Sinclair Stainless Ultimate Trimmer can be used to trim cases to the correct trim length. All you need is the correct Wilson case holder to hold the case.

Sinclair Bench Scope Stand Instructions
Sinclair Bench Scope Stand Instructions

Slide bottom plate (A) onto pole (either side) so that it is flush with the bottom of the pole.

Sinclair Scope Ring Alignment Tool Instructions
Sinclair Scope Ring Alignment Tool Instructions

Install scope rings and bases per the instructions included with them. Do not completely tighten the rings to the bases. Note: If you are using a one-piece base you should check to see if it will require shimming.

Sinclair Flash Hole Reamer Instructions
Sinclair Flash Hole Reamer Instructions

Flash hole reaming serves two purposes: 1) To ensure flash hole size uniformity, and 2) To enable the shooter using small flash hole cases, such as Lapua 220 Russian and Norma BR, to use Wilson and other dies having small decapping pins.

Sinclair Lapping Tool Kit Instructions
Sinclair Lapping Tool Kit Instructions

Due to slight variations in rifle dimensions, the dimensions of scope bases, and the dimensions of the mounting rings themselves - a necessary fact of life in the manufacturing process - mounting a scope to your rifle with “out of the box” components is, at best, a compromise.

Sinclair Bump Gages Instructions
Sinclair Bump Gages Instructions

Proper headspace and minimizing the amount of sizing performed on your fired cases extends brass life, enhances accuracy and ensures the safety of your reloaded rounds.

Sinclair Concentricity Gauge Instructions
Sinclair Concentricity Gauge Instructions

Congratulations! You have purchased another fine Sinclair reloading product. Please take a couple of minutes to read the following instructions prior to using your new Sinclair product.