Case Gauges & Headspace Tools - Sinclair Chamber Length Gage

Need Help? Call 1-800-717-8211

Home | My Account | Help | About Sinclair

View Cart: 0 Items $0.00

Reloading Equipment

Reloading Dies

Reloading Presses

Case Preparation

Loading Blocks

Powder Handling

Measuring Tools

Calipers

Micrometers

Indicators

Bullet Comparators

Case Gauges & Headspace Tools

Bullet Seating Depth Tools (OAL)

Concentricity Gauges

Hornady Modified Cases

Priming Tools

Shellholders

Meplat Uniforming

Case Cleaning

Reloading Kits

RECENTLY VIEWED

	Sinclair AR-15 Rod Guide, 223 Rem $19.85
	Std 7/8-14 Expander Die $24.95
	AccuLab Pocket Pro Scale $117.50

Email a Friend

Enlarge Image

Sinclair Chamber Length Gage

The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks.

The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge. The gauges can be used over and over again.

The differences between published trim lengths and the actual length of your chamber can be quite significant. You could be over trimming your cases by .030 inch or more.

NOTE: The 22 caliber gauge will not work on thin-necked cases such as the 22 Hornet, 218 Bee, or cartridges based on these cases. The 30 caliber gauge will not work on teh 30-30 Winchester. None of the gauges listed will work on tight-necked chambers except for the G-243T.

Description	Item #	Price	Options	Qty
Sinclair Chamber Length Gage	G-XXX

Customer Reviews

Overall:

Chamber Length Gage Inserts are GREAT
2009-03-30 00:18:16
Vincent Morgillo

These inserts take the guess work out of, "what did the chamber reamer they used look like?" This insert works with the cartridge comparator modified cases to give the exact length of the chamber, so brass can be left to a maximum length (.024 less than chamber) for maximum accuracy in your hand loads. They are inexpensive and VERY easy to use.

RECENTLY VIEWED

EMAIL NEWSLETTER

Sinclair Chamber Length Gage