Measuring Tools

Searching for Measuring Tools? You've found Sinclair Intl, home of the best selection and prices every day. Here you'll find 546 Measuring Tools, the best selection online, ranging in price from $2.99 to $499.99. We're the number one online retailer of firearm reloading equipment and supplies because we're passionate about everything we do. We are committed to providing our customers with a great selection of the best products at the best prices, everyday. We know you'll find our Measuring Tools to be everything you expect, so we're proud to offer a 100% satisfaction guarantee. If you're not completely satisfied with your purchase, we'll make it right; whatever it takes. It's easy to browse our complete selection of Measuring Tools. When you find what you're looking for, place an order online or call us at (800) 717-8211. We're passionate about meeting all your needs for firearm reloading equipment and supplies, and we're confident you'll find what you need here. If you have any questions, don't hesitate to give us a call!

Showing 25-36 of 546
  1. Sinclair Hex Style Bullet Comparators - Sinclair Bullet Comparator #2
    Item#:
    749-002-933  
    Our Price:
    $19.99
    Description:
    We have been making these hex style bullet comparators for over 20 years, and believe we make the most accurate tools available. The holes in the Sinclair Bullet Comparators are cut with throating reamers to accurately duplicate the actual throat of a rifle. The comparator is used with calipers, and allows the reloader to accurately measure the length from the major diameter of the bullet to the case head. It also enables you to make accurate seating depth changes to your bullet seater. The Sinclair Comparator does not attach to your calipers, so your calipers are free for other measurements. Machined from stainless steel. There are two different models of Sinclair Comparators to cover bu Mfg: Sinclair International
  2. Hornady Lock-N-Load Concentricity Gauge
    Item#:
    749-007-534  
    Our Price:
    $99.99
    Description:
    The Hornady Lock-N-Load Ammo Concentricity Tool enables the hand loader to identify the bullet runout of each cartridge, and then eliminate it. Once a loaded round is inserted into the Lock-N-Load Ammo Concentricity Tool, the dial indicator is used to adjust the cartridge runout to zero. Easy to set up, and easy to fine-tune your rounds. We've found the Hornady Lock-N-Load Ammo Concentricity Tool to be especially helpful with factory ammunition. Mfg: Hornady
  3. Hornady Lock-N-Load Comparator Insert - Hornady Lock-N-Load Comparator Insert, 30 Cal
    Item#:
    749-000-519  
    Our Price:
    $4.99
    Description:
    The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumbscrew and utilizes inserts for each caliber. The design of this tool allows proper alignment when used with the stoney Point Chamber-All OAL gauge (offset position), or it can be used in a conventional centerline method. Inserts are sold separately, or the tool can be purchaed with six inserts as a kit. The body can also be used with to hold the Stoney Point headspace gage inserts. Mfg: Hornady
  4. Hornady Lock-N-Load Modified Cases - Hornady Lock-N-Load Modified Case, 338 Lapua Mag
    Item#:
    749-000-901  
    Our Price:
    $12.99
    Description:
    There are over 60 different modified cases available to use with Hornady Lock-N-Load Gauge. Hornady will make custom cartridges for those not listed. Details are available in the instructions. Modified cases will not work in tight neck chambers, except for the CFG-6PPCT. Mfg: Hornady
  5. Hornady Lock-N-Load™ Headspace Gauge Tool - Hornady Lock-N-Load Headspacetool Set W/Bushings
    Item#:
    749-005-148  
    Our Price:
    $37.99
    Description:
    This affordable headspace gauge set from Hornady Lock-N-Load Products (formerly Stoney Point) allows the handloader to measure changes to the headspace of cartridges with a dial/digital caliper. Different bushing sizes (depending on cartridge family) insert into the Hornady Lock-N-Load Comparator Body, which attaches to a caliper. This handloader can then measure the changes between fired and sized brass. this enables the handloader to adjust his sizing dies for a proper fit in his chamber. When a handloader oversizes his cases it can cause excessive headspace problems, one of which is to shorten the life of the brass. The Hornady Lock-N-Load Headspace Gauge Set will allow the user t Mfg: Hornady
  6. Hornady Lock-N-Load Comparator Insert - Hornady Lock-N-Load Comparator Insert, 6.5 Mm
    Item#:
    749-000-517  
    Our Price:
    $4.99
    Description:
    The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumbscrew and utilizes inserts for each caliber. The design of this tool allows proper alignment when used with the stoney Point Chamber-All OAL gauge (offset position), or it can be used in a conventional centerline method. Inserts are sold separately, or the tool can be purchaed with six inserts as a kit. The body can also be used with to hold the Stoney Point headspace gage inserts. Mfg: Hornady
  7. Digital Caliper - Lyman Digital Caliper
    Item#:
    539-832-218  
    Our Price:
    $54.99
    Description:
    Deluxe features in a moderately priced, precision caliper. Easy-to-see, LCD digital readout takes the guesswork out of measuring. Gives inside, outside and depth functions. Manual on/off switch. Push button zero allows pre-selection of a zero dimension and plus or minus comparison for sorting of parts based on variation. Single toggle button and dual beam graduations give instant inch and millimeter conver-sions. Reads to 6''''/150mm with .0005''''/.01mm resolution and .001''''/0.1mm accuracy. Mfg: Lyman SPECS: Stainless steel beam, jaws and rollers. 9¼'''' (23.4cm) long. Includes foam-padded, plastic case and battery.
  8. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 7 Mm
    Item#:
    749-000-925  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  9. 6'''' Digital Caliper
    Item#:
    749-004-996  
    Our Price:
    $39.99
    Description:
    Digital calipers offer 4 measuring capabilities: outside dimensions, such as diameters, measured with the large jaws, inside dimensions measured with the smaller jaws, depth measurements with the extending rod, and step measurements taken from the back end of the jaws. Smooth movement of caliper with very accurate measurement along the entire travel Large LCD Numerals for easy reading in 5 Digit display with resolution of .0005"/0.01mm Measurement data can be output through SPC interface port to computer 3 function button: On/Off, Zero reset, Inch/mm conversion 1 SPC output port Firm and crisp response feel on all 3 push buttons, unlike the sof Mfg: Sinclair International
  10. Sinclair Group Measuring Caliper Attachment - 6'''' Digital Caliper
    Item#:
    749-004-996  
    Our Price:
    $39.99
    Description:
    Our group measuring attachments install quickly to your digital or dial caliper blades and enables you to measure your groups at home or at the range. Simply bracket the furthest two bullet holes from outside edge to quickly measure group size. Each Group Measuring device will measure three different calibers of bullets. The first model will measure groups of 22 caliber, 6mm and 30 caliber bullets, the second model will measure groups of 25 caliber, 6.5mm and 7mm bullets. This device works great with our economy MIC-14 digital calipers. Mfg: Sinclair International
  11. Sinclair Insert Style Bullet Comparator - 6'''' Digital Caliper
    Item#:
    749-004-996  
    Our Price:
    $39.99
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  12. Bullet Comparator - Bullet Comparator, 30 Cal
    Item#:
    749-009-210  
    Our Price:
    $10.95
    Description:
    The Sinclair Bullet Checker Stand allows you to quickly and accurately sort bullets by base to ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on your loading bench. The included dial indicator features lever control for easy insertion and removal of bullets into comparators and the choice of using single point or an 11mm flat indicator tips (complete dial indicator also available separately). Bullet Checker Stand Comparators sold separately and available in 22 caliber, 6mm, 6.5mm, 7mm, 30 caliber and 338 caliber or can be used with either of our hex comparators. Mfg: Sinclair International
View All Measuring Tools »