Sinclair International Measuring Tools

So, you're looking for Sinclair International Measuring Tools? Sinclair Intl is your source for the best prices and widest selection anywhere. With 92 Sinclair International Measuring Tools in stock ranging in price from $5.99 to $229.99, you'll find all the best choices available. We carry the very best firearm reloading equipment and supplies around, and we're category experts. Here's how we've become the number one online retailer in the industry: great selection, great prices, and unparalleled customer service. We're so confident in our selection of Sinclair International Measuring Tools, we make you a promise. Our 100% satisfaction guarantee means if you're not completely happy with your purchase, we'll do everything we can to make it right. So, browse our wide selection of Sinclair International Measuring Tools - we know you'll find what you're looking for. When you're ready to place an order, use our easy checkout or give us a call. We strive to provide all the information and support you need about firearm reloading equipment and supplies, so if you need more information about a product feel free to give us a ring!

Showing 13-24 of 92
  1. Sinclair Bullet Sorting Stand - Bullet Comparator, 30 Cal
    Item#:
    749-009-210  
    Our Price:
    $10.99
    Description:
    The Sinclair Bullet Checker Stand allows you to quickly and accurately sort bullets by base to ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on your loading bench. The included dial indicator features lever control for easy insertion and removal of bullets into comparators and the choice of using single point or an 11mm flat indicator tips (complete dial indicator also available separately). Bullet Checker Stand Comparators sold separately and available in 22 caliber, 6mm, 6.5mm, 7mm, 30 caliber and 338 caliber or can be used with either of our hex comparators. Mfg: Sinclair International
  2. Sinclair Chamber Length Gage - Sinclair Chamber Length Gage/6.5 Mm
    Item#:
    749-000-783  
    Our Price:
    $5.99
    Description:
    The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks. The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge Mfg: Sinclair International
  3. Sinclair Bullet Sorting Stand - Sinclair Bullet Sorting Stand With Dial Indicator
    Item#:
    749-011-469  
    Our Price:
    $63.99
    List Price: $79.99
    Description:
    The Sinclair Bullet Checker Stand allows you to quickly and accurately sort bullets by base to ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on your loading bench. The included dial indicator features lever control for easy insertion and removal of bullets into comparators and the choice of using single point or an 11mm flat indicator tips (complete dial indicator also available separately). Bullet Checker Stand Comparators sold separately and available in 22 caliber, 6mm, 6.5mm, 7mm, 30 caliber and 338 caliber or can be used with either of our hex comparators. Mfg: Sinclair International
  4. Sinclair Insert Style Bullet Comparator - Xl Comparator/Bump Gage Body
    Item#:
    749-011-959  
    Our Price:
    $15.99
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  5. Sinclair Bump Gage Insert - Xl Comparator/Bump Gage Body
    Item#:
    749-011-959  
    Our Price:
    $15.99
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR-15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the Mfg: Sinclair International
  6. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 6 Mm
    Item#:
    749-000-929  
    Our Price:
    $7.99
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  7. Sinclair Bump Gage Insert - Sinclair Bump Gage Insert, Standard Magnums Up To 30 Cal,25°
    Item#:
    749-011-485  
    Our Price:
    $9.99
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR-15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the Mfg: Sinclair International
  8. Sinclair Bump Gage Insert - Sinclair Bump Gage Insert, 30-06 Family Up To 8mm, 17°
    Item#:
    749-011-476  
    Our Price:
    $9.99
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR-15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the Mfg: Sinclair International
  9. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 7 Mm
    Item#:
    749-000-925  
    Our Price:
    $7.99
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  10. Sinclair Chamber Length Gage - Sinclair Chamber Length Gage/6 Mm
    Item#:
    749-000-796  
    Our Price:
    $5.99
    Description:
    The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks. The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge Mfg: Sinclair International
  11. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 338 Cal
    Item#:
    749-000-926  
    Our Price:
    $7.99
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  12. Sinclair Bullet Sorting Stand - Bullet Comparator, 6.5mm
    Item#:
    749-009-213  
    Our Price:
    $10.99
    Description:
    The Sinclair Bullet Checker Stand allows you to quickly and accurately sort bullets by base to ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on your loading bench. The included dial indicator features lever control for easy insertion and removal of bullets into comparators and the choice of using single point or an 11mm flat indicator tips (complete dial indicator also available separately). Bullet Checker Stand Comparators sold separately and available in 22 caliber, 6mm, 6.5mm, 7mm, 30 caliber and 338 caliber or can be used with either of our hex comparators. Mfg: Sinclair International
View All Sinclair International Measuring Tools »