Sinclair International Measuring Tools

Looking to buy Sinclair International Measuring Tools? Look no further than Sinclair Intl for the best prices and selection. We feature 89 Sinclair International Measuring Tools starting as low as $5.99. There's a reason we're the number one online seller of firearm reloading equipment and supplies: we love it! We provide our customers with top-quality products, unbeatable prices, and dedicated customer service every day. We know you'll find our Sinclair International Measuring Tools to be everything you expect, so we're proud to offer a 100% satisfaction guarantee. If you're not completely satisfied with your purchase, we'll make it right; whatever it takes. It's easy to browse our complete selection of Sinclair International Measuring Tools. When you find what you're looking for, place an order online or call us at (800) 717-8211. We're here to provide you with all the firearm reloading equipment and supplies and information you need, so - if you don't find what you're looking for online - give us a call!

Showing 49-60 of 89
  1. Sinclair Bump Gage Insert - Sinclair Bump Gage Insert, 6mm Rem/244, 26°
    Item#:
    749-011-474  
    Our Price:
    $9.95
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the s Mfg: Sinclair International
  2. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 17 Cal
    Item#:
    749-000-924  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  3. Sinclair Bump Gage Insert - Sinclair Bump Gage Insert, Ackley Improved To 338, 40°
    Item#:
    749-011-483  
    Our Price:
    $9.99
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the s Mfg: Sinclair International
  4. Sinclair Bullet Seating Depth Tool - Sinclair Seating Depth Guides, Sako A3, Kimber 8400
    Item#:
    749-001-230  
    Our Price:
    $9.49
    Description:
    The Sinclair Seating Depth Tool has been used for decades by handloaders seeking the most accuracy out of their rifles. We have recently improved our seating depth tool to accommodate 17 and 20 caliber shooters without having to have two tools. Our newest model is made from one fourth inch ground and polished stainless steel with one end turned down for use with 17 and 20 caliber rifles and the other end used for 22 caliber and up. This tool helps you determine the length of a loaded round touching the rifling. This length is generally considered to be the best starting point in load development and the best length for fireforming most cases. The Sinclair Seating Depth Tool will work with Mfg: Sinclair International
  5. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 9.3mm
    Item#:
    749-011-512  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  6. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 8mm
    Item#:
    749-000-919  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  7. Sinclair Bullet Seating Depth Tool - Sinclair Seating Depth Guides, Sako A2, Cz527, Kimber
    Item#:
    749-001-238  
    Our Price:
    $9.49
    Description:
    The Sinclair Seating Depth Tool has been used for decades by handloaders seeking the most accuracy out of their rifles. We have recently improved our seating depth tool to accommodate 17 and 20 caliber shooters without having to have two tools. Our newest model is made from one fourth inch ground and polished stainless steel with one end turned down for use with 17 and 20 caliber rifles and the other end used for 22 caliber and up. This tool helps you determine the length of a loaded round touching the rifling. This length is generally considered to be the best starting point in load development and the best length for fireforming most cases. The Sinclair Seating Depth Tool will work with Mfg: Sinclair International
  8. Sinclair 50 Cal. Bullet Comparator & Bmg Bump Gauge - 50 Bmg Bump Gage
    Item#:
    749-008-877  
    Our Price:
    $17.95
    Description:
    We have developed two tools for our 50 BMG customers (shown above). Measure overall length accurately with our new .50 caliber bullet comparator. The Sinclair Bump Gauge for the .50 BMG allows you to accurately measure cases at the shoulder so you can adjust your dies for proper sizing. Both the bullet comparator and bump gauge attach directly to dial or digital calipers. We recommend the use of 8" calipers with both tools. Mfg: Sinclair International
  9. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 375 Cal
    Item#:
    749-000-917  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  10. Sinclair Bullet Sorting Stand - Sinclair Bullet Sorting Stand Without Indicator
    Item#:
    749-011-470  
    Our Price:
    $59.95
    Description:
    The Sinclair Bullet Checker Stand allows you to quickly and accurately sort bullets by base to ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on your loading bench. The included dial indicator features lever control for easy insertion and removal of bullets into comparators and the choice of using single point or an 11mm flat indicator tips (complete dial indicator also available separately). Bullet Checker Stand Comparators sold separately and available in 22 caliber, 6mm, 6.5mm, 7mm, 30 caliber and 338 caliber or can be used with either of our hex comparators. Mfg: Sinclair International
  11. Sinclair 50 Cal. Bullet Comparator & Bmg Bump Gauge - 50 Caliber Comparator
    Item#:
    749-008-880  
    Our Price:
    $14.99
    Description:
    We have developed two tools for our 50 BMG customers (shown above). Measure overall length accurately with our new .50 caliber bullet comparator. The Sinclair Bump Gauge for the .50 BMG allows you to accurately measure cases at the shoulder so you can adjust your dies for proper sizing. Both the bullet comparator and bump gauge attach directly to dial or digital calipers. We recommend the use of 8" calipers with both tools. Mfg: Sinclair International
  12. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, .458 Cal
    Item#:
    749-000-921  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
View All Sinclair International Measuring Tools »