Sinclair International Measuring Tools

Looking for Sinclair International Measuring Tools? Sinclair Intl takes pride in offering one of the best selections of firearm reloading equipment and supplies around. We've got 105 Sinclair International Measuring Tools, from $5.99 to $229.99, meaning your search is over. As the number one online retailer of firearm reloading equipment and supplies we are able to provide excellent customer service, great prices, and top quality merchandise, every day. We know you'll be happy with your purchase of Sinclair International Measuring Tools from Sinclair Intl. We stand behind every product we sell, and we're proud to prove it with our 100% satisfaction guarantee - if you're not completely happy with your purchase, let us know right away. Browse through our selection of 105 Sinclair International Measuring Tools and place your order online or by phone when you find what you need. We strive to provide all the information and support you need about firearm reloading equipment and supplies, so if you need more information about a product feel free to give us a ring!

Showing 85-96 of 105
  1. Sinclair Bump Gage Insert - Sinclair Bump Gage Insert, 220 Swift, 21°
    Item#:
    749-011-471  
    Our Price:
    $9.99
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the s Mfg: Sinclair International
  2. Digital Indicator W/Lever And Flat Point - Digital Indicator W/ Lever And Flat Point
    Item#:
    749-101-731  
    Our Price:
    $69.99
    Description:
    Accuracy 0.001" Features lever control for easy insertion and removal of items needing measured Comes with 11mm flat indicator tip Features absolute and incremental reading, one touch zero, & auto shut-off Intended for use with the Sinclair Bullet Sorting Stand but will work withany of our tools that utilize a dial indicator, including our neck turning adjustment fixture, concentricity gauge and both of our case neck thickness sorting tools Includes black case with protective foam insert. Mfg: Sinclair International
  3. Sinclair Chamber Length Gage - Sinclair Chamber Length Gage/35 Cal
    Item#:
    749-011-494  
    Our Price:
    $5.99
    Description:
    The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks. The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge. The g Mfg: Sinclair International
  4. Sinclair Case Neck Sorting Tool - 50 Bmg Case Neck Tool Pin
    Item#:
    749-008-878  
    Our Price:
    $10.95
    Description:
    The Sinclair Case Neck Sorting Tool is designed for the reloader to quickly sort brass by neck wall thickness. Large variances in neck wall thickness can affect the consistency of how the case seals the chamber and is also an indication of variances in body wall thickness. Cases are rotated under an indicator tip while they are supported on a case neck pilot and a support pin through the flash hole. The low profile and stable platform makes for comfortable use and accurate results. The tool works for 22 thru 45 caliber cases and can be used on 17 and 20 caliber cases with the optional carbide alignment rod. Tool can be ordered with or without a dial indicator. Order Sinclair Case Neck Pil Mfg: Sinclair International
  5. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 44 Cal
    Item#:
    749-011-511  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  6. Sinclair Chamber Length Gage - Sinclair Chamber Length Gage/375 Cal
    Item#:
    749-011-495  
    Our Price:
    $5.99
    Description:
    The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks. The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge. The g Mfg: Sinclair International
  7. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 416 Cal
    Item#:
    749-000-918  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  8. Sinclair Case Neck Sorting Tool - Sinclair 17/20 Carbide Alignment Rod
    Item#:
    749-002-607  
    Our Price:
    $19.99
    Description:
    The Sinclair Case Neck Sorting Tool is designed for the reloader to quickly sort brass by neck wall thickness. Large variances in neck wall thickness can affect the consistency of how the case seals the chamber and is also an indication of variances in body wall thickness. Cases are rotated under an indicator tip while they are supported on a case neck pilot and a support pin through the flash hole. The low profile and stable platform makes for comfortable use and accurate results. The tool works for 22 thru 45 caliber cases and can be used on 17 and 20 caliber cases with the optional carbide alignment rod. Tool can be ordered with or without a dial indicator. Order Sinclair Case Neck Pil Mfg: Sinclair International
  9. Sinclair Insert Style Bullet Comparator - Sinclair Comparator Insert, 408 Cal
    Item#:
    749-011-510  
    Our Price:
    $7.95
    Description:
    This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper (digital calipers listed below). An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators. Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the Mfg: Sinclair International
  10. Sinclair Bump Gage Insert - Sinclair Bump Gage Insert, 45 Degree Shoulder, 45°
    Item#:
    749-011-479  
    Our Price:
    $9.99
    Description:
    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the s Mfg: Sinclair International
  11. Sinclair Chamber Length Gage - Sinclair Chamber Length Gage/416 Cal
    Item#:
    749-011-498  
    Our Price:
    $5.99
    Description:
    The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks. The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge. The g Mfg: Sinclair International
  12. Sinclair Chamber Length Gage - Sinclair Chamber Length Gage/32 Cal
    Item#:
    749-011-493  
    Our Price:
    $5.99
    Description:
    The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks. The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge. The g Mfg: Sinclair International
View All Sinclair International Measuring Tools »