Tools

Searching for Tools? Sinclair Intl carries the best selection at the lowest prices around. Our selection of 89 Tools represents the best of the best, on sale at prices from $3.99 to $1,440.00. Our passion for firearm reloading equipment and supplies has made us the online retailer to beat. We'll bring you excellent customer service, unbeatable prices, and the very best products every day. We know you'll find our Tools to be everything you expect, so we're proud to offer a 100% satisfaction guarantee. If you're not completely satisfied with your purchase, we'll make it right; whatever it takes. Browse through our selection of 89 Tools and place your order online or by phone when you find what you need. Our knowledgeable staff is always here to help meet all your reloading supply needs, so never hesitate to ask a question. By email, by phone, or by smoke signal - we're here to help.

Showing 49-60 of 89
  1. Star Plus Start Tip Tools - Star Plus Star Tip Wing Tools
    Item#:
    123-000-022  
    Our Price:
    $24.99
    Description:
    Fits all Star, Star Plus, and TORX brand screws.  ComfortGrip Handles-soft rubber outer coating for maximum comfort and grip.  Chamfered tool tips eliminate burrs and help tools seat in screw head Mfg: Bondhus SPECS: Wing- Includes TP6, TP7, TP8, TP9, TP10, TP15, TP20. Flag- Includes TP6, TP7, TP8, TP9, TP10, TP15, TP21.
  2. Starrett Punch Set
    Item#:
    749-006-068  
    Our Price:
    $55.49
    Description:
    Every handloader and gun enthusiast should have a set of high quality punches. Starrett pin punches are made of centerless ground, hardened tool steel for long-lasting life. Each punch has a round knurled handle and is clearly marked for size. Punches are 4 inches long, approximately .005 inches undersized for clearance, and are ground square on the end. Set includes 8 punches and a round plastic storage unit for your benchtop. Mfg: Starrett
  3. 17 Piece Tool Set W/Bench Block
    Item#:
    354-000-042  
    Our Price:
    $107.99
    List Price: $129.99
    Description:
    Never get caught without essential gunsmithing tools again. Complete 17-piece tool set, in a handy bench block.  Contains the tools you need for quick field repairs: eight, fixed blade screwdrivers with parallel ground tips fit most gun screws; eight, non-marring brass pin punches and an 8 ounce brass hammer help provide safe removal and installation of the most commonly found assembly pins. Grace USA Bench Block Tool Holders are made out of 60 durometer Neoprene rubber. Neoprene rubber is a general purpose compound that offers excellent oil resistance and chemical stability, as well as vibration dampening.Neoprene will remain stable over a wide temperature range. Mfg: Grace Usa
  4. Bondhus® Balldriver® Hex Sets - Bondhus Standard 13 Piece Wrench Set - .050  -3/8
    Item#:
    749-002-545  
    Our Price:
    $16.95
    Description:
    These industrial hex wrench sets are a must have for the range box or the workbench. These Bondhus sets have ball driver ends on the long end of the wrench for using at angles of up to 25-degrees. All wrenches come in a special holder that locks the wrenches to prevent tool loss. Mfg: Bondhus
  5. Bench Top Tool Holder
    Item#:
    749-013-424  
    Our Price:
    $34.99
    Description:
    This attractive oak tool holder features 16 holes that give you quick and easy access to your tools and keeps your workbench organized. Accepts driver shanks and handles 5/16", 3/8", and 1" in diameter and includes a 9½" long channel for small parts and tools, preventing them from rolling all over your bench and becoming lost. Thick block construction gives years of use, and four no-skid felt pads at the corners keep this tool holder solidly on your bench. 10¼" long x 5¼" wide x 1 1/2" high. Mfg: Sinclair International
  6. Bondhus® Balldriver® Hex Sets - Bondhus Ball Driver Hex 22 Pc Combo Set
    Item#:
    749-004-103  
    Our Price:
    $28.95
    Description:
    These industrial hex wrench sets are a must have for the range box or the workbench. These Bondhus sets have ball driver ends on the long end of the wrench for using at angles of up to 25-degrees. All wrenches come in a special holder that locks the wrenches to prevent tool loss. Mfg: Bondhus
  7. Windage Screwdriver
    Item#:
    354-000-024  
    Our Price:
    $9.99
    List Price: $13.49
    Description:
    Pre-ground, parallel tipped screwdriver correctly fits the windage screw slot to prevent slipping and marring the screw head. Fits windage screws on Leupold®, Redfield®, and Burris® scope bases. Mfg: Grace Usa SPECS: Steel, blue shank with wooden handle. .24” (6.1mm) blade width x .073” (1.8mm) blade thickness x 6½” (16.5cm) OAL.
  8. Prohold Tip Ball End Wrenches - Prohold Tip Ball End L-Wrenches-Metric
    Item#:
    123-000-020  
    Our Price:
    $17.99
    Description:
    Holds the screw tight on the tool every time.  Button is non-magnetic.  Super Smooth rotational action, with no interference ffrom the ProHold Button.  Tool strength is not compromised by the ProHold button. Mfg: Bondhus SPECS: Inch- Includes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8. Metric- Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm.
  9. Starrett Screw Pitch Gage
    Item#:
    749-004-489  
    Our Price:
    $42.99
    Description:
    This screw pitch gage from Starrett will give you accurate threads per inch for any American National, V or Unified machine screw or bolt. Measures thread per inch counts from 4 to 42, 30 leaves, leaves lock in position for easy measuring and fold into the case when not in use. Great time saver. Made in the USA. Mfg: Starrett
  10. Starrett Precision Screwdriver Set
    Item#:
    749-006-064  
    Our Price:
    $64.99
    Description:
    This set of 7 precision 551 Series screwdrivers from Starrett includes 4 straight bladed drivers from .060 inch to .120 inch and 3 Phillips drivers from 1 to 00. All blades have vapor chromed, hardened tips and tapered, ergonomic handles. Handle tops spin freely for precise turning control. Great set for precision work, snap close case included. Mfg: Starrett
  11. Star Plus Start Tip Tools - Star Plus Star Tip Flag Tools
    Item#:
    123-000-023  
    Our Price:
    $23.99
    Description:
    Fits all Star, Star Plus, and TORX brand screws.  ComfortGrip Handles-soft rubber outer coating for maximum comfort and grip.  Chamfered tool tips eliminate burrs and help tools seat in screw head Mfg: Bondhus SPECS: Wing- Includes TP6, TP7, TP8, TP9, TP10, TP15, TP20. Flag- Includes TP6, TP7, TP8, TP9, TP10, TP15, TP21.
  12. Lyman Gunsmith Punch Set
    Item#:
    749-003-522  
    Our Price:
    $24.99
    Description:
    Quality steel punches with hardened steel punch tips and knurled steel handles. Set includes sizes 1/16, 3/32, 1/8, 5/32, and 3/16 in. punches; 1/8 in center punch; brass drift punch; storage block. Works well in conjunction with the Brass Tapper above. Mfg: Lyman
View All Tools »