Whidden Gunworks Products

Hunting down Whidden Gunworks Products? Sinclair Intl takes pride in offering one of the best selections of firearm reloading equipment and supplies around. Here, you'll find 23 Whidden Gunworks Products, the best available, at prices from $11.49 to $219.99. Our excellent selection of firearm reloading equipment and supplies, along with our unwavering commitment to the best prices and customer service, has made us the number one online retailer in the industry. Your satisfaction is our top priority, so we offer a 100% satisfaction guarantee on all of our products. If you're not completely satisfied with your Whidden Gunworks Products, give us a call right away and we'll make it right. Shop our inventory of Whidden Gunworks Products and place your order online or over the phone. We strive to provide all the information and support you need about firearm reloading equipment and supplies, so if you need more information about a product feel free to give us a ring!

Showing 1-12 of 23
  1. Whidden Meplat Trimmer Kit For Wilson Case Trimmer - Meplat Trimmer Kit
    Item#:
    749-013-519  
    Our Price:
    $49.99
    Description:
    Whidden’s meplat trimming system ensures consistent shaping and sizing of bullet tips to eliminate one variable that can compromise accuracy. It works in your Wilson Case Trimmer, so there’s no need to purchase an additional, dedicated hand crank assembly. The bullet is retained in precise alignment with the Wilson tool’s cutting head between a caliber-specific bullet holder and a cap that fits over the case trimmer’s length stop, so every bullet is trimmed to the same length. The holder keeps the bullet dead straight, so the tip will not get trimmed at a random angle that leaves it out-of-balance. Trimmer kit, bullet holders, and Wilson case trimmer must be purchased Mfg: Whidden Gunworks
  2. Whidden Meplat Trimmer Kit For Wilson Case Trimmer - .30 Caliber Bullet Holder
    Item#:
    749-012-852  
    Our Price:
    $11.49
    Description:
    Whidden’s meplat trimming system ensures consistent shaping and sizing of bullet tips to eliminate one variable that can compromise accuracy. It works in your Wilson Case Trimmer, so there’s no need to purchase an additional, dedicated hand crank assembly. The bullet is retained in precise alignment with the Wilson tool’s cutting head between a caliber-specific bullet holder and a cap that fits over the case trimmer’s length stop, so every bullet is trimmed to the same length. The holder keeps the bullet dead straight, so the tip will not get trimmed at a random angle that leaves it out-of-balance. Trimmer kit, bullet holders, and Wilson case trimmer must be purchased Mfg: Whidden Gunworks
  3. John Whidden's Bullet Pointing Die System
    Item#:
    749-008-241  
    Our Price:
    $219.99
    Description:
    John Whidden has won two Long Range Championship's at Camp Perry using bullets pointed in this die system. The Whidden Pointing Die System is designed to profile the tips of jacketed bullets to reduce drag and improve BC. Testing has shown that shooters will see pointed bullets shoot three fourths to 1 MOA flatter at 1000 yards, with wind drift improvement of about 5 percent. The Whidden system works like a regular reloading die in a standard press (including the Forster Co-Ax) and uses caliber specific sleeves to change bullet calibers. Pointing bullets can be done just as fast as sizing brass. Extensive testing has also shown that light meplat trimmer after pointing produces the maximum po Mfg: Whidden Gunworks
  4. Whidden Bullet Pointing Sleeve - Whidden Bullet Pointing Sleeve, 30 Cal
    Item#:
    749-011-844  
    Our Price:
    $41.99
    Description:
    John Whidden has won two Long Range Championship’s at Camp Perry using bullets pointed in this die system. The Whidden Pointing Die System is designed to profile the tips of jacketed bullets to reduce drag and improve BC. Testing has shown that shooters will see pointed bullets shoot ¾ to 1 MOA flatter at 1000 yards, with wind drift improvement of about 5%. The Whidden system works like a regular reloading die in a standard press (including the Forster Co-Ax) and uses caliber specific sleeves to change bullet calibers. Pointing bullets can be done just as fast as sizing brass. Extensive testing has also shown that light meplat trimming after pointing produces the maximum possibl Mfg: Whidden Gunworks
  5. Whidden Pointing Die Inserts - Whidden #1 Pointing Die Insert
    Item#:
    749-012-706  
    Our Price:
    $41.99
    Description:
    Pointing Die Inserts enhance the benefits gained with the BPDS by improving the bullet’s BC further by smoothing the transition between the ogive and the newly formed tip. Developed in cooperation with noted ballistician Bryan Litz, and used in conjunction with the correct pointing sleeve for your bullet. #0 insert works with the broadest range of match/target bullets; #1 is best for bullets with extra-long, pointy noses; #2 is designed for bullets with shorter, blunter ogives. Mfg: Whidden Gunworks
  6. Whidden Meplat Trimmer Kit For Wilson Case Trimmer - 6.5mm Caliber Bullet Holder
    Item#:
    749-012-850  
    Our Price:
    $11.49
    Description:
    Whidden’s meplat trimming system ensures consistent shaping and sizing of bullet tips to eliminate one variable that can compromise accuracy. It works in your Wilson Case Trimmer, so there’s no need to purchase an additional, dedicated hand crank assembly. The bullet is retained in precise alignment with the Wilson tool’s cutting head between a caliber-specific bullet holder and a cap that fits over the case trimmer’s length stop, so every bullet is trimmed to the same length. The holder keeps the bullet dead straight, so the tip will not get trimmed at a random angle that leaves it out-of-balance. Trimmer kit, bullet holders, and Wilson case trimmer must be purchased Mfg: Whidden Gunworks
  7. Cnc Machined Dillon Toolheads - Cnc Machined Floating Toolhead - 550
    Item#:
    749-012-833  
    Our Price:
    $54.99
    Description:
    Replacement toolheads for the Dillon 550 and 650reloading presses are CNC machined to exceptionallytight tolerances to ensure precise alignment ofdies in the press. Positions the dies exactly perpendicularto the ram’s axis of force, keeping them perfectlyaligned in relation to each other, and directlyabove each of the rotating stations of the press.Helps you produce more consistent ammunitionwith greater accuracy potential—a small additionalinvestment that helps you unlock the full potentialof your dies. The Standard toolhead is a good choicefor the reloader who wants high-volume output ofhigher-quality ammunition than can be produced withthe 550/650 factory toolhea Mfg: Whidden Gunworks
  8. Whidden Meplat Trimmer Kit For Wilson Case Trimmer - 6mm Caliber Bullet Holder
    Item#:
    749-012-849  
    Our Price:
    $11.49
    Description:
    Whidden’s meplat trimming system ensures consistent shaping and sizing of bullet tips to eliminate one variable that can compromise accuracy. It works in your Wilson Case Trimmer, so there’s no need to purchase an additional, dedicated hand crank assembly. The bullet is retained in precise alignment with the Wilson tool’s cutting head between a caliber-specific bullet holder and a cap that fits over the case trimmer’s length stop, so every bullet is trimmed to the same length. The holder keeps the bullet dead straight, so the tip will not get trimmed at a random angle that leaves it out-of-balance. Trimmer kit, bullet holders, and Wilson case trimmer must be purchased Mfg: Whidden Gunworks
  9. Whidden Meplat Trimmer Kit For Wilson Case Trimmer - .22 Caliber Bullet Holder
    Item#:
    749-012-847  
    Our Price:
    $11.49
    Description:
    Whidden’s meplat trimming system ensures consistent shaping and sizing of bullet tips to eliminate one variable that can compromise accuracy. It works in your Wilson Case Trimmer, so there’s no need to purchase an additional, dedicated hand crank assembly. The bullet is retained in precise alignment with the Wilson tool’s cutting head between a caliber-specific bullet holder and a cap that fits over the case trimmer’s length stop, so every bullet is trimmed to the same length. The holder keeps the bullet dead straight, so the tip will not get trimmed at a random angle that leaves it out-of-balance. Trimmer kit, bullet holders, and Wilson case trimmer must be purchased Mfg: Whidden Gunworks
  10. Whidden Bullet Pointing Sleeve - Whidden Bullet Pointing Sleeve, 7mm
    Item#:
    749-011-848  
    Our Price:
    $41.99
    Description:
    John Whidden has won two Long Range Championship’s at Camp Perry using bullets pointed in this die system. The Whidden Pointing Die System is designed to profile the tips of jacketed bullets to reduce drag and improve BC. Testing has shown that shooters will see pointed bullets shoot ¾ to 1 MOA flatter at 1000 yards, with wind drift improvement of about 5%. The Whidden system works like a regular reloading die in a standard press (including the Forster Co-Ax) and uses caliber specific sleeves to change bullet calibers. Pointing bullets can be done just as fast as sizing brass. Extensive testing has also shown that light meplat trimming after pointing produces the maximum possibl Mfg: Whidden Gunworks
  11. Whidden Meplat Trimmer Kit For Wilson Case Trimmer - 7mm Caliber Bullet Holder
    Item#:
    749-012-851  
    Our Price:
    $11.49
    Description:
    Whidden’s meplat trimming system ensures consistent shaping and sizing of bullet tips to eliminate one variable that can compromise accuracy. It works in your Wilson Case Trimmer, so there’s no need to purchase an additional, dedicated hand crank assembly. The bullet is retained in precise alignment with the Wilson tool’s cutting head between a caliber-specific bullet holder and a cap that fits over the case trimmer’s length stop, so every bullet is trimmed to the same length. The holder keeps the bullet dead straight, so the tip will not get trimmed at a random angle that leaves it out-of-balance. Trimmer kit, bullet holders, and Wilson case trimmer must be purchased Mfg: Whidden Gunworks
  12. Cnc Machined Dillon Toolheads - Cnc Machined Toolhead - Dillon 550
    Item#:
    749-012-831  
    Our Price:
    $29.99
    Description:
    Replacement toolheads for the Dillon 550 and 650reloading presses are CNC machined to exceptionallytight tolerances to ensure precise alignment ofdies in the press. Positions the dies exactly perpendicularto the ram’s axis of force, keeping them perfectlyaligned in relation to each other, and directlyabove each of the rotating stations of the press.Helps you produce more consistent ammunitionwith greater accuracy potential—a small additionalinvestment that helps you unlock the full potentialof your dies. The Standard toolhead is a good choicefor the reloader who wants high-volume output ofhigher-quality ammunition than can be produced withthe 550/650 factory toolhea Mfg: Whidden Gunworks
View All Whidden Gunworks Products »