The eight-station auto indexing progressive shotshell press minimizes the complexity and turns your shotshell reloading experience into an efficient, consistent, and uniform process all with the stroke of a lever. Perfect for the accomplished hunter or clay shooter who requires accuracy and precision, loaded after load. With the upstroke of the ram, you’ll complete a round of reloading functions with the exception of indexing, which occurs on the downstroke of the ram.
The Grand was engineered with smart technologies - including a “no hull” “no powder or shot” capabilities to cut down on wasteful spillage. It features a massive frame constructed of high-grade aluminum casting, steel rods, and links. The 1½" diameter ram is connected to RCBS’s legendary Compound Leverage System to deliver years of smooth operation. The large openings in the frame give easy access to all of the 8 stations. It serves up a universal case holder at every station to accept shells for either 12 or 20 gauge allowing precise sizing of the metal portion of the hull down to the rim. A unique steel sizing ring, not found on most presses, resizes high and low base hulls. A handy, spring-loaded “tilt-out” wad guide makes feeding wads a breeze. Both the 25 lb. shot and 1 lb. powder hoppers feature on/off and a forward quick-drain system. Change out powder and shot bushings in less than one minute. The powder station is located at the front of the press for fast and easy removal to measure a powder charge, should you want to check it for accuracy. It has three settings: On, Off, and Empty. To empty the powder or shot hoppers just attach the drain tube and turn the measure to Empty. The Grand accepts RCBS or Hornady Powder and Shot Bushings. Mounting The Grand to a solid bench press is easy with two sets of mounting holes, three larger holes, or four small holes that can be integrated with the RCBS Riser Stand (sold separate). Not for use with Black Powder.
Sinclair, Issue:5A, Page:066